Publication:
Design of transceiver module for dual polarized doppler solid state radar for casa student test bed

Thumbnail Image
Authors
Litchfield-Santana, Alexandra
Embargoed Until
Advisor
Rodríguez-Solís, Rafael A.
College
College of Engineering
Department
Department of Electrical and Computer Engineering
Degree Level
M.S.
Publisher
Date
2009
Abstract
The design of a Transmit Receive Solid State Module for a Solid State, X-band (9.5 GHz), Doppler, Dual Polarized meteorological radar system for the CASA student Test Bed is presented in this thesis. This Solid State Transceiver Module is capable of outputting a 1dBm power when transmitting and it receives a minimum detectable signal of -110dBm with as low as 4dB of Noise Figure. This device is able to handle an input signal no greater than -55dBm and it has a 24 channel system dynamic range of 41.19dBm. A twenty four channel Solid State Radar is to be designed in the future, then two Transceiver Modules are needed to fulfill each channel (one per polarizations) for a total of forty eight Solid Sate Modules. The scope of this project is to design a fully operational Transceiver Module and test it with one channel. This system will be the first Solid State system designed and developed at UPRM for precipitation measurements.

Este trabajo presenta el diseño y desarrollo de la tarjeta de transmisión y recepción para un radar de estado sólido, banda X (9.5GHz), doppler y de doble polarización para el “CASA Student Test Bed". Este Módulo de Transmisión y Recepción de estado sólido es capaz de proveer una salida de 1dBm cuando está transmitiendo y recibe una señal mínima de - 110dBm, con una figura de Ruido tan baja como 4dB. Este dispositivo es capaz de manejar señales no mayores de -55dBm y el sistema con 24 canales posee un rango dinámico de 41.19dBm. En el futuro se diseñará un radar de estado sólido con 24 canales. Entonces dos módulos de transmisión y recepción se necesitarán por cada canal (uno para cada polarización) para un total de 48 módulos de estado sólido. En este proyecto se diseñará un módulo de transmisión y recepción completamente operacional y se realizarán pruebas para un solo canal. Este sistema para medir precipitación será el primer sistema de estado sólido diseñado y desarrollado en la Universidad de Puerto Rico en Mayagüez.
Keywords
Cite
Litchfield-Santana, A. (2009). Design of transceiver module for dual polarized doppler solid state radar for casa student test bed [Thesis]. Retrieved from https://hdl.handle.net/20.500.11801/2336