Search
Now showing items 1-10 of 28
Fabrication and characterization of chitin-carbon nanotubes composites
(2015)
Most polymers by themselves have limitations due to their poor mechanical, thermal and
electrical properties compared with metallic and ceramic materials. Therefore, to expand
their range of applications these properties ...
Study of wire fabrication of aluminum treated with diboride particles
(2014)
The present thesis focuses on the fabrication of aluminum wires by adding XB2 nanoparticles into an aluminum matrix, where X is a transition metal: Nb, Mg and Zr.
The incorporation of aluminum in the XB2 particles is ...
Fabrication and characterization of bioferroelectric composites
(2015)
Bio-ferroelectric composites have recently sparked intensive research in order to develop
inexpensive and environmental electronic devices such as capacitors, transistors, and
actuators. The present research involves the ...
Fabrication and characterization of porous aluminum and zinc via selective dissolution of AI-Zn alloys
(2013)
Chemical dealloying can be used to fabricate porous metals by removing one or more of the species out of an alloy. Generally, a corrosive electrolyte is used to selectively dissolve a noble element. Alloy concentration, ...
Fabrication and characterization of sintered recycled glass designed for polluted soil filtering
(2014-07)
Soil pollution generates diseases, hunger, and agricultural problems. Porous recycled glass beds were produced to study the feasibility of using them for polluted soil filtering. This research discusses structural and ...
Synthesis and characterization of (AlMg)B2- aluminum based composites and nanocomposites
(2007)
The present study involves a novel method to synthesize under vacuum (AlMg)B2 – aluminum based composites. Incorporation of MgB2 into aluminum is a complex process because of the lack of wettability between both components. ...
Fabrication and characterization of functionally graded Al/AlB2 matrix composites for high wear aerospace applications using centrifugal casting
(2006)
Functionally graded advanced composite materials contain reinforcement particles whose volume fraction varies continuously thereby bearing a non-uniform microstructure with continuously changing properties. Aluminum-based ...
Efectos de la deformación mecánica sobre compuestos de matriz de aluminio tratados térmicamente
(2004)
A novel aluminum matrix composite reinforced with ceramic particles of AlB2 obtained
through a cast process at temperatures below 800°C using commercial alloys of
aluminum-boron (5 wt%. B) and aluminum-copper (33.2 wt%. ...
Study of light weight, high strength, multifunctional composite material: Aluminum reinforced with AIB2 particles
(2017)
Aluminum, its alloys and composites are widely used in many modern life applications, such as microelectromechanical systems. In this research, an aluminum matrix composite reinforced with AlB2 particles was studied in ...
Effect of cyclic high loading rates on the fatigue strength of aluminum-based composites
(2009)
The study of fatigue under high loading rates is of great interest in the complete characterization of a new series of composites with Al-Cu-Mg matrix reinforced with AlB2 dispersoids. Homogeneous and functionally graded ...